Features Include

• Easily read and write up to 2 GigaBytes (GB) of PCMCIA Memory card data which is 250 MegaWords (MW) of Controller data
• Communicates with the Allen-Bradley® SLC 5/03, 5/04 or 5/05 over the SLC backplane using standard Ladder Instructions
• Communicates with a PC over a TCP/IP Ethernet network using a PCMCIA Ethernet card
• Communicates with ASCII Serial devices over an RS232 channel using a PCMCIA Serial card
• Data stored in ASCII format can be read and written by an Allen-Bradley® SLC 5/03, 5/04, 5/05, Microsoft® Access™, Excel™, Word™ and most Text Editors
• Data stored in Binary format can be read and written by an Allen-Bradley® SLC 5/03, 5/04, and 5/05
• Other than a PCMCIA card, this module does not require additional hardware, software or cables

Applications Include

• Data Logging: Save (Write) Production, Process and Alarm Status from Allen-Bradley® Controllers
• Recipe Loading: Load (Read) Process Information to Allen-Bradley® Controllers
• e-Manufacturing: Communicate between the factory floor and the enterprise, View and Analyze data in real-time

SLC Backplane Interface

• Single slot, Class 4 module for the SLC 1746 I/O chassis
• 250 word M0 file for Command, Reply and Status
• 30,000 word M1 file for User Data
• 250 word G file for User Configuration
• 2,250 word G file for File Transfers
• Does not use Input or Output files, therefore it does not use any I/O space

PCMCIA Sockets

• Has two hot swappable, Plug and Play, Type II PCMCIA sockets
• Each socket can hold a different Type I or Type II PCMCIA card, OR both sockets can be used to hold one Type III PCMCIA card
• Accepts the following 5 Volt, 1 Amp, 8 and 16 bit PCMCIA cards (CardBus NOT supported):
• ATA Flash (up to 2GB)
• Battery Backed SRAM
• Serial I/O
• Ethernet

Programming

• Read file, Write file, Make directory, Delete file or directory, Format disk, Send stream and Receive stream are programmed with standard Ladder Instructions
• Read / Write up to 30,000 words of data per function call (transfer between the M1 file and the Module file system)
• Any mix of data types (S, B, T, C, R, N, F, A, ST, I/O, M) can be stored
• Command execution, using M0 file, behaves as an immediate instruction (does not wait for End of Scan nor interfere with SLC scan time)
• User programmable, non-retentive Real Time Calendar / Clock
• 8 user programmable LED's

Hardware

Feature	Network Drive
Operating System	Microsoft® Windows CE™
PCMCIA Cards Supported	ATA Flash Battery Backed SRAM Serial I/O 10baseT Ethernet
File Systems	1 Internal 4 Mbyte FLASH FAT16 1 Internal 4 Mbyte RAM FAT16 2 PCMCIA Card FAT16 2 Remote Common Internet (CIFS)
File Format	Universal Naming Convention (UNC)
Connections	2 Serial I/O (COM1/2) 2 Ethernet TCP/IP HTTP Server 2 Ethernet TCP/IP CIFS Client
System Speed	133 MHz
System DRAM	32 MBytes
System Flash	32 MBytes